|
|
Heating Components
 | Accu-Glass Products, Kapton® heaters provide a means to heat sample trays, cuvettes, reagent bottles, etc. inside a vacuum. Constructed with two sheets of Kapton® film that is resistant to chemicals, oils, and radiation and have a total thickness of only 0.008”. Maximum heat output is 150ºC. FEP adhesive used internally. Lead wires are Teflon insulated with a length of 1 foot. Heaters are 10 watts/sq. in. for rapid warm-up. Vacuum rated to 1x10-8 Torr and 200ºC maximum exposure temperature. Available with or without Acrylic adhesive. |
|
|
Kapton® Heater Film - 1" x 1", 28 VAC
Part Number: 112230
Kapton® heat film, 28 VAC, 10 Watts, rated for 1x10-8 torr.
Available with or without acrylic adhesive backing.
|
$65.00
|
|
|
|
Kapton® Heater Film - 2" x 2", 28 VAC
Part Number: 112231
Kapton® heat film, 28 VAC, 40 Watts, rated for 1x10-8 torr.
Available with or without acrylic adhesive backing.
|
$69.00
|
|
|
|
Kapton® Heater Film - 1" x 3", 28 VAC
Part Number: 112232
Kapton® heat film, 28 VAC, 30 Watts, rated for 1x10-8 torr.
Available with or without acrylic adhesive backing.
|
$90.00
|
|
|
|
Kapton® Heater Film - 2" x 2", 115 VAC
Part Number: 112233
Kapton® heat film, 115 VAC, 40 Watts, rated for 1x10-8 torr.
Available with or without acrylic adhesive backing.
|
$74.00
|
|
|
|
Kapton® Heater Film - 1" x 3", 115 VAC
Part Number: 112234
Kapton® heat film, 115 VAC, 30 Watts, rated for 1x10-8 torr.
Available with or without acrylic adhesive backing.
|
$95.00
|
|
|
|
|
|
