Search:
 
Accu-Glass Products :: Subminiature-D
Printable version 
Categories Categories
General Information General Information

Subminiature-D, Hermetic Vacuum Feedthroughs, Connectors, and Wire Assemblies

UHV 9, 15, 25 and 50-pin Subminiature-D hermetic feedthroughs (vacuum feedthrough) are constructed with multi pin arrangements per Mil-DTL-24308 (formerly Mil-C-24308) specification. All pins are gold-plated and arranged in a straight through pin-to-pin design, hermetically sealed and electrically insulated into a stainless steel shell using the latest in glass-ceramic bonding technology (ceramic feedthrough).

Multi-pin Sub-D Vacuum Feedthrough Connectors and Assemblies

Ultrahigh vacuum compatible Sub-D wire assemblies are fitted with PEEK (polyether-etherketone) polymer connectors and Kapton® insulated ribbon cable to meet the rigorous demands of ultrahigh vacuum environments. Each subminiature-D vacuum connector includes two (2) captured stainless steel socket head screws that securely lock a connector to its mating electrical feedthrough. To eliminate virtual leaks, in-vacuum captured screws are vented where required.

NEW! Introducing the HV Bulkhead-D multi pin feedthrough Product Line

AGP's HV Bulkhead-D hermetic electrical feedthrough was developed for high-vacuum flat-chamber-wall applications where conventional ISO NW KF or LF flanges are either not available, or just not practical. Our universal 2x3.5 inch rectangular flange, the Bulkhead-D flange, accommodates standard 9, 15, 25 or 50-pin subminiature-D electrical feedthroughs, and shares the same gasket and fastening accessories... providing simple and convenient interchangeability.


Subminiature-D, also referred to as D-Sub or Sub-D multi-pin electrical feedthrough assemblies with up to 250 pin configurations are routinely fabricated. Custom solutions with over 1,000 pins have also been engineered and produced.

Tip: Accu-Glass Products’ Conflat CF and/or ISO KF/LF “Conical Reducers” are ideally suited for the expansion of vacuum feedthrough capacity on smaller chamber flanges… like fitting a 50-pin 4.50-inch CF flange mounted feedthrough using a 2.75-inch CF chamber port. Click on the following links to access CF Conical Reducers, and/or ISO NW Conical Reducers.

 

CLICK ON A CATEGORY BELOW TO SEE OUR AVAILABLE SUB-D VACUUM FEEDTHROUGHS, CONNECTORS, AND CABLE ASSEMBLIES FOR PURCHASE.

 

Subminiature-D

Current OrderCurrent Order Current Order
AuthenticationAuthentication Authentication
Copyright © 2007-2017 Accu-Glass Products