Home › Fiber Optics

Fiber Optics Components

1 seven-fiber and single-fiber optic feedthrough on a CF flange and a bulkhead feedthrough Show Feedthroughs / Cables for 1 seven-fiber and single-fiber optic feedthrough on a CF flange and a bulkhead feedthrough
Feedthroughs / Cables
UHV service, bifurcated fiber optic cables with a PEEK braid jacket and SMA 905 connectors Show Cables, Bifurcated for UHV service, bifurcated fiber optic cables with a PEEK braid jacket and SMA 905 connectors
Cables, Bifurcated
Two collimator lenses and an optical filter holder Show Collimators / Accessories for Two collimator lenses and an optical filter holder
Collimators / Accessories
One SMA to SMA 905 fiber optic coupler and an SMA to ST fiber optic adapter Show UHV Couplers / Adapters / Mounts for One SMA to SMA 905 fiber optic coupler and an SMA to ST fiber optic adapter
UHV Couplers / Adapters / Mounts
One SMA 905 air coupler and an ST to ST fiber optic air coupler Show Air Couplers / Adapters for One SMA 905 air coupler and an ST to ST fiber optic air coupler
Air Couplers / Adapters
Close up of one red and one silver bare optical fiber Show UHV Optical Fiber for Close up of one red and one silver bare optical fiber
UHV Optical Fiber
Close up of PEEK braided shielding and stainless steel fiber optic cable wrap Show UHV Jacket / Cable Wrap for Close up of PEEK braided shielding and stainless steel fiber optic cable wrap
UHV Jacket / Cable Wrap
Two aluminum SMA 905 fiber optic connectors Show UHV Optical Connectors for Two aluminum SMA 905 fiber optic connectors
UHV Optical Connectors
Orange fiber optic cable rack Show Accessories for Orange fiber optic cable rack
Accessories
Fiber optic polishing puck and bare fiber chuck connected to an SMA bare fiber holder Show Polishing / Cleaning for Fiber optic polishing puck and bare fiber chuck connected to an SMA bare fiber holder
Polishing / Cleaning
Fiber Optic Drawing

Vacuum Fiber Optics Components

Accu-Glass Products line of Fiber Optic Components, including Feedthroughs and Cable Assemblies.

Our UHV Fiber Optic feedthroughs are hermetically sealed into a stainless steel shell, using the latest in glass bonding technology.  

Our proprietary seal allows for the broadest temperature range of any fiber feedthrough available today:  From -269°C to +250°C.

Fiber Optic Feedthrough Specifications
Material  
  • Shell
  • Seal
304 Stainless Steel
Glass-Ceramic
Feedthrough Vacuum Range Specifications
Vacuum Range  
  • UHV, Ultrahigh vacuum
  • HV, High vacuum


1x10-10  Torr
1x10-8 Torr
Feedthrough Temperature Specifications
Vacuum Temperature  
  • Feedthrough
  • Flange Mount, Conflat
  • Flange Mount, ISO
  • Thermal Gradient


-200ºC to 250ºC
-200ºC to 450ºC
-26ºC to 150ºC
25ºC / Minute Maximum
Fiber Multimode Specifications
Multimode optical fiber  

Step Index Fiber, 100-1000um UV/VIS or High-OH

  • Operating Wavelength

Step Index Fiber, 100-1000um VIS/NIR or Ultra Low-OH

  • Operating Wavelength

Numerical Aperture
Core / Cladding Ratio
Power
Bend Radius, Momentary / Long Term
Insertion loss, Interconnect

Graded-Index Fiber, 62.5um Core / 125um Clad
  Operating Wavelength
  Numerical Aperture
  Bend Radius, Momentary / Long Term
  Attenuation at 850 / 1300nm



200-800nm
 

400-2200nm
 

0.22 + 0.02 or 24.8º
1:1.1
<1W
200X / 400X Core
-0.8db to -2.0db


850 and 1300nm
0.27 + 0.02
400X / 800X Core
< 3.0db / 0.8db
* Overall assembly ratings must be adjusted to that of the lowest rated component.  

Patch Cables for in-vacuum and air-service are also available in many core sizes and wavelength ranges.  

Patch Cables are offered with SMA 905 Premium Connectors as off-the-shelf standards.

pdf iconCatalog Page